Working with a large or complex Revit model can make it difficult to focus on the area that actually needs your attention.
Multiple floors, structural elements, building services and linked models can quickly make a 3D view feel cluttered, particularly when you're trying to inspect a connection, coordinate services or review a specific part of a building.
Revit Section Boxes provide a simple way to take control of your 3D views.
By temporarily clipping the model around the area you want to work on, Section Boxes can make navigation easier, help you inspect model information and create clearer views for coordination and presentation.
What Is a Section Box in Revit?
A Section Box is a view-specific tool that allows you to limit the portion of a Revit model displayed within a 3D view.
When a Section Box is enabled, a box appears around the visible model. You can then select and drag its controls to adjust how much of the model is displayed. Anything outside the boundaries of the Section Box is clipped from that view.
Importantly, you're not deleting model elements or permanently hiding them. You're simply controlling the portion of the model visible within the 3D view.
This makes Section Boxes ideal when you need to temporarily focus on one particular area without affecting the wider project.
Focus on Specific Areas of Your Model
One of the biggest advantages of Section Boxes is the ability to remove unnecessary information from your view.
Rather than navigating through the entire building, you can create a focused 3D view around the area you're currently working on. For example, you could isolate:
- A plant room
- A staircase
- A single apartment or room
- One floor of a multi-storey building
- A roof junction
- An MEP services zone
- A structural connection
- A specific coordination area
With the surrounding model clipped away, it becomes much easier to navigate around the area and select the elements you need. This can be particularly useful when working with complex architectural, structural and building services information within the same project.
Inspect Internal Model Details More Easily
Some elements can be difficult to inspect in a complete 3D model because they're surrounded by walls, floors, ceilings or other components. You could hide these elements individually, but that can quickly become time-consuming.
Instead, a Section Box allows you to gradually clip through the model until the required information becomes visible. This can help when you need to:
- Review structural connections
- Inspect service routes
- Check wall or floor build-ups
- Review internal components
- Investigate coordination issues
- Verify model geometry
- Understand relationships between different building elements
Because each side of the Section Box can be adjusted independently, you can control exactly how much of the model is visible.
Make Complex Models Easier to Navigate
Large Revit models can contain a significant amount of geometry, making some 3D views difficult to navigate.
Section Boxes don't reduce the overall size of your Revit model, but they can reduce the amount of model geometry displayed in a particular 3D view.
This can make the workspace easier to navigate and gives you a much clearer working environment when you're concentrating on a small part of a larger project. Rather than continually orbiting around an entire building to find the area you need, you can create focused working views for different parts of the project.
For larger buildings or detailed multidisciplinary models, this simple change can make day-to-day model navigation much more manageable.
Improve Revit Coordination Views
Section Boxes can also be valuable when reviewing information from different disciplines.
For example, you could create a dedicated 3D coordination view around a plant room and use it to review how architectural, structural and MEP elements interact within that space.
Removing the rest of the building makes it much easier to understand the relationships between different elements and concentrate on potential coordination issues.
Section Boxes can be particularly effective when combined with other Revit tools such as:
- View Templates to maintain consistent view settings
- Revit Filters to highlight particular elements or systems
- Visibility/Graphics settings to control the information displayed
- Linked model visibility settings to manage information from other disciplines
- Combining these tools gives you much greater control over what appears within your coordination views.
Create Clearer 3D Views for Presentations
Section Boxes aren't limited to modelling and coordination. They can also help you create clearer 3D views for presentations and project discussions.
A complete building model can contain far more information than you need to communicate a particular design decision. By clipping away unnecessary areas, you can create focused views that make complex information easier to understand.
Section Boxes can be used to create:
- Building cutaway views
- Internal room views
- MEP coordination views
- Structural framing views
- Construction detail views
- Design review visuals
- Views for project meetings
These focused 3D views can help clients and project stakeholders understand how different elements relate to each other without being distracted by the rest of the model.
Create Dedicated Section Box Views
Rather than continually changing the same 3D view, consider creating dedicated views for areas you regularly need to inspect.
For example, you might have separate 3D views for:
- Plant Room Coordination
- Roof Coordination
- Stair Core
- Ground Floor Services
- Structural Connections
Each view can have its own Section Box position and visibility settings. This gives you quick access to important areas of the model without having to recreate the same view every time you need it.
Clear naming conventions also make these views easier for other members of the project team to find and understand.
Revit Section Box Best Practices
A few simple habits can make Section Boxes even more useful within your Revit workflow:
- Create dedicated 3D views for important coordination or working areas.
- Use clear view names so other team members understand what each view is for.
- Duplicate important 3D views before making major changes if you want to preserve the original.
- Keep Section Boxes focused on the area you're actually reviewing.
- Combine them with Revit Filters when you need to highlight particular elements.
- Use View Templates where appropriate to maintain consistent graphical standards.
- Review your working views regularly and remove unnecessary views as the project develops.
A little organisation can prevent your Project Browser from becoming cluttered while making important coordination views much easier to find.
Take Greater Control of Your Revit 3D Views
Revit Section Boxes are a simple feature, but they can make a significant difference when working with detailed or multidisciplinary models.
By isolating the information you need, you can create a clearer working environment, inspect difficult areas of the model and produce focused 3D views for coordination and project discussions.
When combined with tools such as Revit View Templates, Filters and Visibility/Graphics settings, Section Boxes can become an important part of a more organised and efficient Revit workflow.
Develop Your Revit Skills with TMS CADCentre
If you're looking to build your Revit knowledge and develop more efficient ways of working, TMS CADCentre offers instructor-led Autodesk Revit training for Architecture, Structure and MEP users.
As an Autodesk Authorised Training Centre, our Revit courses are available live online or in-person at our Larbert training centre. We can also provide bespoke Revit training for businesses looking to develop particular skills or workflows across their teams.
Whether you're getting started with Revit or looking to improve the way your team works, our experienced trainers can help you develop the practical skills you need.
Explore our Revit training courses or contact the TMS CADCentre team to discuss the right training for you or your business.
